
Lighting designed for the place and for the bill.
Industrial buildings, commercial and office buildings, shops, car parks, roads: In All Africa (IN2A) designs, installs and maintains your lighting installations.
What a lighting project has to get right
Good lighting is hardly noticed: people see well, without glare, and consumption stays under control. A lighting project must therefore reconcile four requirements: the visual comfort of the occupants, control of energy consumption, compliance with standards and legal requirements, and the aesthetic and architectural choices of the place.
In All Africa (IN2A) has the know-how to install your light fittings and lighting systems with your current and future needs in mind. Our studies are based on lighting calculations and energy performance calculations.
What we deliver
- Indoor lighting: commercial, office or industrial buildings, buildings open to the public, housing, shops
- Outdoor lighting: street lighting, street furniture, car parks, architecture and heritage
- Emergency lighting and escape-route signage lighting
- Lighting calculations and energy performance calculations
- Lighting study
- LED luminaires
- Control and detection
- Emergency lighting
- Maintenance
A model of principle: typical equipment, not the mock-up of a particular installation. Schematic diagram: it shows how the parts follow one another, not the drawing of a particular installation.
LED continuous-row lighting
LED continuous-row lighting lights large areas with continuous lines that are easy to install and to maintain. It is the solution chosen in the stores we equip: the lighting lines of the Decathlon Marina store in Casablanca can be seen in our gallery.
In All Africa (IN2A) installs and maintains LED lighting for large retail stores, offices, buildings and shopping centres.

Sports and street lighting
In All Africa (IN2A) delivered the specialised lighting of two training pitches at the Centre national des sports Moulay Rachid in Salé for the Ministry of Youth and Sports, the street lighting of road 22 (voie 22) at Casanearshore and the street and decorative lighting of the Aglou Centre tourist complex near Tiznit.
Renovating the lighting of a building in use
In a workshop, a warehouse or a store already in service, the lighting is renewed without closing the site. The project starts with a survey: fittings in place, heights, circuits, lighting levels measured at the workstations. The study then compares the existing installation with a new LED layout, with the corresponding lighting calculation, and states what can be kept: cable trays, circuits, controls.
The works proceed area by area, outside working hours where necessary. Lighting control is part of the project: switching by zone, according to presence or daylight, means that only the areas in use are lit. The emergency lighting and escape-route signage lighting are reviewed at the same time, so that the whole installation is upgraded in a single operation.
Common situations
- Replacing old lighting with LEDs
- Refitting a store or a workshop
- Extending a building
- Lighting a car park or a road
- Setting up control by zone
Outdoor lighting, car parks and roads: the points to study
Outdoor lighting has to meet other constraints than indoor lighting. The fittings are exposed to rain, to dust and, on the coast, to salt air; their protection rating and their materials are chosen accordingly. The position of the columns, their height and their spacing determine the uniformity of the lighting, and the power supply requires trenches, buried cables and a control cabinet.
In All Africa (IN2A) handles these projects as a complete work package, from the supply network to the luminaires. We delivered the car park lighting of the Decathlon store in Marrakech, the street lighting of the Alia II housing development in Had Soualem, with its MV/LV electrification, and that of the Sidi Rahal craft complex. For sports lighting, as at the Centre national des sports Moulay Rachid in Salé, the study must also limit glare for the players.
What to prepare for a quote
- Drawings of the premises or the site, with heights
- Activity carried out in each area
- Existing lighting, if there is any
- Hours of occupancy
- Architectural or appearance constraints
Photos of our work
Your project, step by step
From the first site visit to the upkeep of the installation.
Survey and needs
We survey the premises, their heights and their uses, as well as the existing lighting in the case of a renovation.
Lighting study
We draw up the lighting calculation, choose the luminaires and their layout, and define the controls by zone.
Installation and adjustment
Our teams install and connect the luminaires, adjust the controls and check on site the result achieved in each area.
Lighting maintenance
We then maintain the installation, from replacing faulty fittings to adapting it to new layouts.
Our references
Client, scope of work and city, as they appear in our list of references.
Lighting and LED continuous-row lighting: your questions
01Does In All Africa (IN2A) carry out the lighting study?
Yes. Our lighting installations come with lighting calculations and energy performance calculations.
02Do you work on street lighting?
Yes. Among other projects, In All Africa (IN2A) delivered the street lighting of road 22 (voie 22) at Casanearshore, that of the Alia II housing development in Had Soualem and the street lighting of the Sidi Rahal craft complex in Marrakech.
03What is a lighting calculation?
It is the calculation document that states, for a room or an outdoor space, the lighting level achieved with the planned luminaires and their layout. It makes it possible to check before the works that the lighting will be sufficient and even. In All Africa (IN2A) draws it up for its lighting projects.
04Can you switch to LED while keeping the existing installation?
Often, in part. Depending on their condition, the cable trays, the circuits and the controls can be kept, and only the luminaires are replaced. A survey of the installation settles the question. In All Africa (IN2A) renews lighting systems in industry and in retail alike.
05Does In All Africa (IN2A) supply and install the light fittings of buildings?
Yes. Light fittings, that is, the supply and installation of the lighting units, are part of several of our work packages: the EHTP conference hall in Casablanca, as well as the OFPPT specialised institute of applied technology and boarding school in Tafraout.
Understand before the works begin

A store’s electrical work package: the checklist
In All Africa (IN2A) has delivered the electrical work package of several Decathlon stores in Morocco. This checklist sets out, in the order of the project, what the person in charge of an opening has to decide, follow, check and keep.
Read the guideCalculate the voltage drop of a cable
Current, length, cross-section, conductor metal and power factor: this tool calculates the voltage lost along a cable. It does not validate the cross-section on its own; that remains an engineer’s job.
Open the toolGoing further
Related services.
Power systems
From grid connection to distribution
Renewable energy
Solar, wind, hydro, geothermal, biomass
Pumping and irrigation
Power supply and control of stations
Fire detection (SSI)
SDI, SMSI, alarm
Access control and security
Access, intrusion, video surveillance
Public address and sound systems
Safety and ambience
A lighting project?
A work package to price, a substation to renovate, a home to equip: tell us what you need and we will get back to you.
- +212 522 212 298
- commercial@inallafrica.com
- 86, lot. Mandarouna, rue 23, Aïn Chock, Casablanca




