Lighting
The lighting of your home or office, controlled from your phone.

The lighting, roller shutters, air conditioning, security, access control and sound system of your home or office, brought together in a single installation.
Home automation brings the electrical functions of a home or an office together in one system: lighting, roller shutters, air conditioning, security, access control, sound system. Once linked together, these functions can be controlled remotely, scheduled and automated.
The result comes down to four words: comfort, security, communication and energy savings. Your home becomes more comfortable, safer, better connected and more energy-efficient. In All Africa (IN2A) is the official representative of the international brand TIS Smarthome.
A model of principle: typical equipment, not the mock-up of a particular installation. Schematic diagram: it shows how the parts follow one another, not the drawing of a particular installation.
Every project starts with the definition of the objectives and the areas of application: what must be controlled, scheduled or automated, what must be monitored remotely, and the scenarios suited to your daily routine or to the way your site operates.
In All Africa (IN2A) then draws up the architecture of the installation: transmission mode (wired network, radio or powerline carrier) and control system (central control unit, tablets, computers). We handle the design, programming and wiring, then the maintenance, diagnostics and repairs.
Home automation can be integrated into new buildings and renovations alike, or used to upgrade an existing system, in individual or collective housing, in commercial and office buildings, in industry and in buildings open to the public.

Every project starts with the choice of an architecture: the transmission mode (wired network, radio waves or power-line carrier), the protocol and the control system, with a central controller and interfaces on a tablet, phone or computer.
In addition to the TIS Smarthome range, which we represent, In All Africa (IN2A) integrates the open protocols on the market: KNX, a wired bus standard for building automation, Z-Wave and ZigBee, two low-power radio protocols, as well as Wi-Fi and Ethernet. The choice depends on the building, new or existing, and on the equipment to be controlled.
Energy management is part of the project: heating, lighting and large consumers are monitored and controlled, and the installation can be prepared to communicate with a smart grid.
In a house under construction, home automation is planned at the same time as the electrical installation. The conduits, the location of the cabinet and the wiring of the controls are decided on the drawings, before the finishes. This is when the choice is widest: every lighting circuit, every roller shutter and every air conditioning unit can be linked to the system with no visible works.
In a home that is already lived in, the starting point is the installation in place. The transmission mode is chosen according to what the building allows: wired network where conduits are available, radio or powerline carrier where you want to avoid opening up the walls. The project can also move forward in stages, starting with a few functions and then extending the installation to the other rooms.

A successful home automation project starts with how you live, not with the equipment. Which rooms are concerned? Which functions do you want to control remotely, and which should run by themselves, at a set time or in a given situation? Who will use the system day to day, and from which screens: phone, tablet, central control unit? The answers shape the architecture of the installation and avoid installing functions that will not be used.
Scenarios group several actions under a single command. A leaving scenario can, for example, switch off the lighting, close the shutters and arm the security system; an evening scenario can switch on the living-room lighting and start the sound system. In All Africa (IN2A) defines them with you during the study, programs them at commissioning and can adjust them afterwards, when your habits change.
A demonstration filmed by In All Africa (IN2A): controlling the installation from a tablet. The video is in French.
The functions brought together in a single installation, with TIS Smarthome equipment.
The lighting of your home or office, controlled from your phone.
Opening and closing the shutters from your phone.
Air conditioning controlled from your phone.
Security and access control integrated into the same installation as everything else.
The sound system controlled with the rest of the installation.
In All Africa (IN2A) is first and foremost an electrical contractor: home automation is designed together with your electrical installation, not added alongside it.
We start from your home and the way you use it to define what needs to be controlled.
Supply, installation, connection and commissioning of the equipment.
Maintenance, diagnostics and repairs after commissioning.
It is the set of technologies used to centralise and automate the electrical functions of a building: lighting, shutters, air conditioning, security, access control, sound system. They are controlled from a phone, a tablet or a central control unit.
Yes. In All Africa (IN2A) integrates home automation into new buildings and renovations alike, and can upgrade a system that is already in place.
No. It also applies to offices, to commercial and industrial buildings and to buildings open to the public, where it joins up with the building management system (GTB).
Yes. In addition to TIS Smarthome, In All Africa (IN2A) designs and installs systems on KNX, Z-Wave and ZigBee. KNX is a wired standard for building automation; Z-Wave and ZigBee are radio protocols, convenient in an existing building.
A scenario is a sequence of actions started by a single command or at a programmed time: for example closing the shutters, switching off the lighting and arming the security system when you leave the house. In All Africa (IN2A) defines the scenarios with you and programs them at commissioning.
Not necessarily. Depending on the installation in place, transmission can run over a wired network, by radio or by powerline carrier, which limits the works in an existing home. In All Africa (IN2A)’s study starts from your current installation to determine what can be kept.
In All Africa (IN2A) provides maintenance, diagnostics and repairs for the home automation installations it delivers. As In All Africa (IN2A) is first and foremost an electrical contractor, we work on the home automation cabinet and on the electrical installation it is connected to alike.
A work package to price, a substation to renovate, a home to equip: tell us what you need and we will get back to you.